The axis of oscillation is mounted on eccentric studs, which are rotated to adjust the separation between the blades. The beam is mounted on spherical, self alignable treads.

A single handle mounted at one end of the machine lets you adjust the separation of blades in all models.

The blades are suitable for cutting stainless steel. The upper blade is two-edged and the lower blade is four-edged. The hydraulic circuit includes a protection valve against overloads. The hold-down cylinders apply greater pressure as the required cutting force increases.

All models are provided with a gooseneck.

The rear gauge is motorised and very robust, ready to receive the impact of sheets to be cut. Screws are of trapezoidal thread and a bronze screw. It is controlled from the front part of the machine and has a finely adjustable steering wheel. It can optionally be provided with an automatic custom-made positioner. It can be hidden to cut long sheets. The shears are provided with a cut counter, cut off light and timer which can be adjusted to the length of the cut, to achieve greater production.

The work bench has sliding balls to facilitate handling of the sheet. It has three support arms. The left hand one is grooved with millimetre marks and used as square rule. The right hand one is also grooved and have millimetre marks. Both are mounted on retractable tilting tops for cutting the sheet with the front part.

OPTIONAL ACCESSORIES:

Support arms longer than 1000 mm. Automatic blade separation. Retractable rear support for thin sheets. Ball-race rear-stop screws.